



Sleeve & Hub 3rd/4th 5MT MY02-07
Sleeve and hub assembly for 3rd/4th gear selection. This sleeve & hub is intended for use with 3rd drive gears that have a stepped tooth design to limit over-travel of the sleeve. Earlier 3rd gears with sheet metal stop plate incorporated into the gear should use 32605AA080 sleeve & hub instead.
Gear clash due to missed shifts or worn synchros will cause damage to the synchro dog teeth. If the sharp angles on the leading edges of the sleeve (slider) become rounded over or damaged shift performance will suffer. In severe cases a burr forms on the sleeve and prevents engagement or will cause the transmission to be stuck in gear. Damage to leading edges of the reverse gear teeth will make shifting into reverse more difficult. Any of these conditions require replacing the gear and hub assembly.
The side of the sleeve with the stepped cutout should face 3rd gear. Check condition of the original hub insert springs before reassembly and replace them if they are worn or damaged.
Manufacturer Part No: 32219AA280
What it fits:
- Impreza 5MT MY02-07
- Legacy / Outback 5MT MY02-07
- Forester 5MT MY02-08
- Baja 5MT MY03-06
Couldn't load pickup availability
Pickup available at Rallispec
Usually ready in 24 hoursPairs well with

Sleeve & Hub 3rd/4th 5MT MY02-07
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.